Solitude or Primitive and Unconfined Recreation Quality

From wilderness.ordvac.com
Revision as of 20:18, 5 March 2023 by Admin (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

The objective of monitoring the Solitude or Primitive and Unconfined Recreation Quality is to assess whether management of a wilderness is trending over time towards protecting outstanding opportunities for specific, unique recreational experiences. This monitoring focuses on three aspects of the quality:

  1. Solitude
  2. Primitive recreation
  3. Unconfined recreation

Wilderness is the only public land designation that mandates federal land managers protect outstanding opportunities for a unique recreational experience, namely "solitude or a primitive and unconfined type of recreation" (Wilderness Act, Section 2[c]). Although the Forest Service cannot ensure that visitors will have such experiences, the agency must protect conditions that promote such opportunities and keep them from declining over time. Thus, wilderness should provide opportunities for introspection, natural quiet, challenge, and freedom from societal obligations. Visitors may desire other experiences than those described in the Wilderness Act, but those experiences are not part of the legislated requirement to preserve wilderness character.

Forest Service managers must protect all three aspects of this quality that include (1) solitude, (2) primitive recreation, and (3) unconfined recreation. There are subtle differences in the three aspects of this qualities' meanings (Seekamp and Cole 2009) and they can change independently of each other, which makes it necessary to monitor all three aspects to understand change in the overall quality. For the Solitude or Primitive and Unconfined Recreation Quality, two monitoring questions provide the broad context and four indicators provide the structure for this monitoring (as summarized in table 1.5.1).

Table 1.5.1—Monitoring questions, indicators, measures, and measure types for the Solitude or Primitive and Unconfined Recreation Quality.
Solitude or Primitive and Unconfined Recreation Quality
Monitoring question: What are the trends in outstanding opportunities for solitude?
Indicator Measure Measure type
Remoteness from sights and sounds of human activity inside wilderness Index of encounters Required
Index of recreation sites within primary use areas Required to select at least one
Acres of wilderness away from access and travel routes and developments inside wilderness
Miles of unauthorized trails
Remoteness from sights and sounds of human activity outside the wilderness Acres of wilderness away from adjacent travel routes and developments outside the wilderness Required
Monitoring question: What are the trends in outstanding opportunities for primitive and unconfined recreation?
Indicator Measure Measure type
Facilities that decrease self-reliant recreation Index of NFS developed trails Required to select at least one
Index of authorized constructed recreation features
Management restrictions on visitor behavior Index of visitor management restrictions Required

5.1 Monitoring Questions

Two monitoring questions are used in monitoring the Solitude or Primitive and Unconfined Recreation Quality:

  1. What are the trends in outstanding opportunities for solitude?
  2. What are the trends in outstanding opportunities for primitive and unconfined recreation?

The first monitoring question addresses the experience of solitude. The Wilderness Act recognizes that wilderness, protected from human development or settlement, can provide an opportunity for solitude not available other places. A review of wilderness writings suggests that solitude encapsulates a range of experiences, including privacy, being away from civilization, inspiration, self-paced activities, and a sense of connection with times past (Borrie and Roggenbuck 2001; Cole 2012). Both the presence of other visitors in wilderness and characteristics of the setting degrade opportunities for solitude (Seekamp and Cole 2009). Specifically, encountering other visitors in wilderness and seeing or hearing signs of modern civilization detract from the experience of solitude. Increasing visitation, population growth (especially near wilderness), and areas of concentrated use within wilderness all have the potential to degrade opportunities for solitude.

The second monitoring question addresses the primitive and unconfined nature of wilderness experiences. The Wilderness Act acknowledges rapidly disappearing opportunities for these types of recreation and it defines wilderness as a place where these opportunities should exist. The inclusion of primitive and unconfined recreation as a separate monitoring question recognizes the importance of non-motorized and non-mechanized travel, self-reliance and self-discovery, and the need for places where people can be free from social constraints.

Primitive recreation encompasses types of recreation that require primitive travel and living in an environment with minimal facilities (Hall and Davidson 2013; Johnson et al. 2005; Seekamp and Cole 2009). The founders of the wilderness idea referred to primitive travel, such as canoeing, horse packing, and hiking, as appropriate activities in wilderness. Because primitive recreation requires self-reliance and demonstration of skills in wilderness travel, opportunities for such experiences are degraded by the presence of facilities that make wilderness travel easier, such as bridges and high-standard trails. Opportunities are greater in wildernesses with areas suitable for off-trail exploration.

Unconfined recreation encompasses the sense of discovery, adventure, and mental challenge presented by large wildernesses in which visitors can travel widely and explore unique and unknown environments on their own without having to conform to society's norms or rules. Outstanding opportunities for unconfined recreation may be associated with large expanses of land suitable for off-trail exploration, as well as places that have relatively low levels of use and are free from management restrictions over visitor activities. Research shows that visitors associate unconfined recreation with the "freedom to roam" and an absence of highly restrictive regulations (Seekamp and Cole 2009).

The first monitoring question "What are the trends in outstanding opportunities for solitude?" is addressed through two indicators:

  1. Remoteness from sights and sounds of human activity inside wilderness.
  2. Remoteness from sights and sounds of human activity outside the wilderness.

Using two indicators for remoteness allows managers to assess conditions that are subject to management control (inside wilderness) separately from those that are outside of management control (outside wilderness).

The second monitoring question "What are the trends in outstanding opportunities for primitive and unconfined recreation?" is addressed through two indicators, one focused on primitive recreation and the other on unconfined recreation:

  1. Facilities that decrease self-reliant recreation.
  2. Management restrictions on visitor behavior.

5.2 Indicator: Remoteness from Sights and Sounds of Human Activity Inside Wilderness

This indicator assesses wilderness visitation and the capacity of a wilderness setting to allow for escape from the sights and sounds of human activity. The opportunity to achieve solitude is addressed as a function of both the density and location of visitors within wilderness—most of whom stay near established trails, destinations, and preexisting campsites—as well as the opportunity to get away from those visitors and their impacts by accessing more remote areas.

The Merriam-Webster dictionary (Merriam-Webster 2016) defines solitude as "the quality or state of being alone or remote from society." The presence of other visitors, particularly visitors outside one's own group, directly impacts the experience of solitude. Additionally, recreational activities lead to visible signs that remind people of the presence of others, and thereby detract from a feeling of solitude (Seekamp and Cole 2009). Recreation impacts at campsites and other locations where visitors congregate are one of the most prevalent and obvious human impacts that wilderness visitors may encounter.

Remoteness, meaning distance from the sights and sounds of civilization, is important for achieving a sense of solitude (Dawson 2004). Research shows that most wilderness visitors stay on developed trails and most wilderness use concentrates within a few miles of trailheads and access points, especially where day use makes up most of the visitation. Therefore, remote locations away from trails within a wilderness provide opportunities for visitors to find solitude.

5.2.1 Measure: Index of Encounters

This measure monitors encounters by assessing one of the following, listed in order of preference: (1) an index evaluating traveling and camp encounters; (2) the number of traveling encounters or camp encounters (but not both); (3) the number of visitors; or (4) the trend in visitation. Given the centrality of encounters to the experience of solitude, combined with the absence of good data for most wildernesses, these alternatives involve a preferred hierarchy of data sources.

There are two preferred direct metrics for encounters that should be used together if data are available for both:

  1. Traveling Encounters—The average number of other groups (or people) seen per standardized unit of time (typically an 8-hour day) while in wilderness during the primary use season.
  2. Camp Encounters—The daily average number of camping groups visible or audible from a visitor's campsite during the primary use season.

These definitions are from the national minimum protocol for monitoring solitude (USDA Forest Service 2016). However, wildernesses may use local protocols that tailor these definitions to local circumstances (for instance, including sightings of people outside wilderness, or overflights). The national minimum protocol explains how to include other information. Using these direct metrics captures the two important types of encounters: (1) meeting other people while traveling through an area and (2) seeing or hearing other campers. Research shows that camp encounters are highly salient to campers (Borrie and McCool 2007) and more impactful than traveling encounters (Hall and Irizarry 2014). Ideally, wildernesses will report on both metrics and combine them into an index. However, in many wildernesses, most visitors are on single day trips and camp encounters are not pertinent. In this case, only traveling encounters will be used.

If data are not available for the direct metrics of encounters, other data that provide an indirect metric of encounters may be used. Specifically, visitation data may be collected for all, or part, of a wilderness and may be used to determine trend over time. These data may be derived from mandatory permits, self-issue permits, trailhead registers, car counts at trailheads, or traffic counters. Using the indirect metrics, the measure would be the total count (number of visitors or number of groups) generated during the primary use season.

If visitation data are not available, professional judgment of the trend in visitation or encounters may be used as a last resort. Local units are not asked to make estimates of encounters or visitation, but simply to report their judgment about overall trend and provide additional documentation (e.g., a brief narrative) about their basis for this judgment. It is possible (even likely) that a variety of types of data would be available for a given wilderness. In this case, rather than trying to develop a new measure option, a wilderness would report the trend as professional judgment and provide documentation of the types of data that support the overall conclusion.

This measure is required for all Forest Service wildernesses. A 10-percent change in the measure value, number of encounters, or number of visitors will result in a change in trend for this measure. Once there are five measure values, the threshold for meaningful change will switch to regression analysis, and statistical significance will determine the trend in the measure. If professional judgment is used, any change in defined categories will result in a change in trend. An increase in the number of encounters or visitors corresponds with a degrading trend.

Refer to part 2, section 5.2.1, for more detailed guidance on data sources and compilation protocols, analysis, data adequacy, and interpreting the threshold for meaningful change.

5.2.2 Measure: Index of Recreation Sites Within Primary Use Areas

This measure is an index that assesses the number of recreation sites and their condition, based on the national minimum protocol for recreation site monitoring. A recreation site is a place where visible impacts to vegetation or soil from recreational use are documented. The intent of this measure is to include user-created sites, not facilities provided by the agency. However, designated sites such as designated campsites are included in this measure. Administrative recreation facilities, such as bridges or toilets, are not included under this measure because they are captured under a different indicator (see section 5.4.2). Often recreation sites are campsites, but they may also include viewpoints and day use areas. Locally unique situations, such as impacts at the base of climbing routes, may be included at the discretion of local units. The important point is to use consistent guidelines in each monitoring cycle.

It also is important to train field staff to properly measure site impacts and, ideally, to use the same staff over time to conduct the monitoring. Different observers may be more or less thorough in searching for recreation sites, and may judge the same conditions in different ways. When this happens, it is possible that what appear to be changes from one monitoring cycle to another may simply be a reflection of different judgments made by different observers.

If conducted by well-trained staff, monitoring should document accurately the increases and decreases in the number of recreation sites. Detecting significant change in the mean condition of recreation sites is more difficult, in part, due to some inherent subjectivity and because heavily impacted sites can undergo deterioration that will not be captured during subsequent monitoring (i.e., when they were in the maximum impact categories during the initial inventory).

Local units are required to select at least one of the following measures: Index of Recreation Sites Within Primary Use Areas (section 5.2.2), Acres of Wilderness Away from Access and Travel Routes and Developments Inside Wilderness (section 5.2.3), or Miles of Unauthorized Trails (section 5.2.4); units may select more than one measure if relevant to the individual wilderness. A 5-percent or greater change in the measure value will result in a change in trend for this measure. Once there are five measure values, the threshold for meaningful change will switch to regression analysis, and statistical significance will determine the trend in the measure. An increase in the measure value corresponds with a degrading trend.

Refer to part 2, section 5.2.2, for more detailed guidance on data sources and compilation protocols, analysis, data adequacy, and interpreting the threshold for meaningful change.

5.2.3 Measure: Acres of Wilderness Away from Access and Travel Routes and Developments Inside Wilderness

This measure assesses the total number of wilderness acres located more than ½ mile from access points, travel routes (e.g., authorized trails and roads, aircraft landing sites), and developments inside wilderness. The distance of ½ mile is somewhat arbitrary because the visual and audible impacts of roads and developments depend on the topography and vegetation of a wilderness, among other factors. Also, because a central data analyst computes this measure, it is not possible to customize it for each wilderness. However, this distance is consistent with the Recreational Opportunity Spectrum (Clark and Stankey 1979), and using a consistent buffer allows for the determination of trends over time. The total number of acres is preferred over the percentage of wilderness.

One limitation to this measure is that the area away from access and travel routes and developments inside wilderness is unlikely to change because trails, roads, and structures are rarely built or removed in wilderness. Nevertheless, there is potential for change resulting from the addition or removal of recreational sites or other development in a wilderness. For example, conversion of a user-created trail to a NFS system trail would decrease the number of acres away from travel routes and developments.

Local units are required to select at least one of the following measures: Index of Recreation Sites Within Primary Use Areas (section 5.2.2), Acres of Wilderness Away from Access and Travel Routes and Developments Inside Wilderness (section 5.2.3), or Miles of Unauthorized Trails (section 5.2.4); units may select more than one measure if relevant to the individual wilderness. A 3-percent or greater change in the total number of acres away from access and travel routes and developments will result in a change in trend for this measure. Once there are five measure values, the threshold for meaningful change will switch to regression analysis, and statistical significance will determine the trend in the measure. A decrease in the acreage corresponds with a degrading trend.

Refer to part 2, section 5.2.3, for more detailed guidance on data sources and compilation protocols, analysis, data adequacy, and interpreting the threshold for meaningful change.

5.2.4 Measure: Miles of Unauthorized Trails

This measure assesses the number of linear miles of unauthorized (non-system) trails within wilderness. This includes user-created trails as well as other unauthorized routes (e.g., decommissioned roads or trails) that are currently in use. It may also include climbing routes.

Many wildernesses face the potential for rapid expansion in the quantity of user-created trails due to the increasing use of Global Positioning System (GPS) technology for cross-country travel and social networking to share those data. It is extremely difficult to eradicate these trails once created, and unauthorized trails can introduce new use into previously pristine areas.

If a wilderness collects data on unauthorized trails, it is strongly recommended that they select this measure, as it is more sensitive to change than the other two measures included under this indicator. As the ability to monitor unauthorized trails improves (with new types of technology and imagery), local units need to verify that apparent change over time reflects the creation of new trails, and not simply the level of effort applied to detect trails.

Local units are required to select at least one of the following measures: Index of Recreation Sites Within Primary Use Areas (section 5.2.2), Acres of Wilderness Away from Access and Travel Routes and Developments Inside Wilderness (section 5.2.3), or Miles of Unauthorized Trails (section 5.2.4); units may select more than one measure if relevant to the individual wilderness. A 3-percent or greater change in the miles of unauthorized trails will result in a change in trend for this measure. Once there are five measure values, the threshold for meaningful change will switch to regression analysis, and statistical significance will determine the trend in the measure. An increase in the mileage corresponds with a degrading trend.

Refer to part 2, section 5.2.4, for more detailed guidance on data sources and compilation protocols, analysis, data adequacy, and interpreting the threshold for meaningful change.

5.3 Indicator: Remoteness from Sights and Sounds of Human Activity Outside the Wilderness

This indicator focuses on human activity occurring outside or on the boundary of a wilderness that is visible or audible from within wilderness. Although legal protections and restrictions of wilderness do not extend to activities occurring outside a wilderness boundary, these activities can still degrade the wilderness experience.

Section 2(c) of the Wilderness Act defines wilderness as an area with "the imprint of man's work substantially unnoticeable." As nearby human population centers expand, the evidence of human activities and developments outside and adjacent to wilderness increases, thereby decreasing opportunities for solitude within wilderness. For example, noise from highways outside of wilderness can sometimes carry a long distance into wilderness (Newman et al. 2012; Park et al. 2010).

Signs of human activity and development outside wilderness manifest in many ways, including sounds from automobiles and off-highway vehicles on nearby travel routes, decreased visibility from air and light pollution, and visual evidence of increasing urbanization from high ridges and peaks. While many activities outside wilderness have the potential to affect the opportunities for solitude within wilderness, data are largely unavailable for either the extent of the activities or their effect within wilderness.

5.3.1 Measure: Acres of Wilderness Away From Adjacent Travel Routes and Developments Outside the Wilderness

This measure assesses the total number of wilderness acres more than ½ mile from roads, structures, and other developments that are located outside a wilderness or on the boundary, including cherry-stemmed access road corridors and developed inholdings. It is recognized that wildernesses will vary in how sights and sounds of activity outside wilderness impact visitors in a wilderness. In particular, monitoring the area away from adjacent travel routes and developments outside the wilderness may underestimate the effects of large urban areas on nearby wildernesses. However, because a central data analyst computes this measure, it is not possible to customize it for each wilderness. Nevertheless, wildernesses can capture some of these impacts through customizing the minimum protocol for encounters. Travel routes and developments on inholdings are included in the analysis for this measure because inholdings are not part of a wilderness. Any route or development should be included in only this measure or Acres of Wilderness away from Access and Travel Routes and Developments Inside Wilderness, but not both.

This measure is required for all Forest Service wildernesses. A 3-percent or greater change in the total number of acres away from adjacent travel routes and developments outside a wilderness will result in a change in trend for this measure. Once there are five measure values, the threshold for meaningful change will switch to regression analysis, and statistical significance will determine the trend in the measure. A decrease in the acreage corresponds with a degrading trend. Refer to part 2, section 5.3.1, for more detailed guidance on data sources and compilation protocols, analysis, data adequacy, and interpreting the threshold for meaningful change.

5.4 Indicator: Facilities that Decrease Self-Reliant Recreation

This indicator focuses on the presence of facilities in wilderness that decrease opportunities for self-reliant recreation. Though many of these facilities are in place to protect natural resources, they may adversely affect opportunities for a primitive and unconfined type of recreation.

Primitive recreation consists of activities that require self-reliance and the absence of modern conveniences (Roggenbuck 2004). Although recreation facilities in wilderness are provided to concentrate user impacts and protect resources, and are appreciated by many visitors, such facilities reduce the feeling of primitiveness (Johnson et al. 2005; Seekamp and Cole 2009). Recreation facilities can include trails, bridges, signs, campsites, and other infrastructure or services that limit opportunities for self- reliance. The type of recreational facility is also important; for example, traveling on a narrow, rocky path creates a more primitive feeling than traveling on a wide, groomed surface (Hall 2001).

This indicator provides a means for measuring trends in the presence of durable or relatively permanent facilities that reduce opportunities for primitive recreation. Although many recreational facilities are physical developments that could be included under the Undeveloped Quality, to avoid double counting, they are only counted under this quality and indicator.

5.4.1 Measure: Index of NFS Developed Trails

This measure is an index that assesses the miles of NFS trails and their trail classes. The trail class is the prescribed scale of development for a trail, representing its intended design and management standards. Trail classes are general categories reflecting trail development, arranged along a continuum from least developed (class 1) to most developed (class 5). Trail classes are established at the time of trail construction and may be updated infrequently. This measure uses the trail class (design standard) rather than the actual trail condition because only a very small percentage of trails is surveyed each year for condition. The actual condition of trails is likely to be more primitive than the official trail class given shortfalls in staffing and resources to maintain trails. Hence, this is a conservative measure and unlikely to show increases in opportunities for primitive recreation that actually occur.

Data on miles of existing NFS trails for each trail class are currently available in tabular form for all wildernesses. A user view will be created in NRM-Wilderness that serves data back to the local unit for validation.

Local units are required to select either this measure or the following measure, Number of Authorized Constructed Recreation Features, or may select both measures if relevant to the individual wilderness. A 3-percent or greater change in the measure value will result in a change in trend for this measure. Once there are five measure values, the threshold for meaningful change will switch to regression analysis, and statistical significance will determine the trend in the measure. An increase in the measure value corresponds with a degrading trend.

Refer to part 2, section 5.4.1, for more detailed guidance on data sources and compilation protocols, analysis, data adequacy, and interpreting the threshold for meaningful change.

5.4.2 Measure: Number of Authorized Constructed Recreation Features

This measure assesses the total number of authorized constructed recreation features. It does not include other types of non-recreational developments or structures because those are included in the Undeveloped Quality (see section 4.2.1). Authorized constructed recreation features can include bridges, toilets, fire grates, bear boxes, and others. System trails are not included in this measure because they are monitored under the previous measure (see section 5.4.1). Smaller, less obtrusive facilities, such as trail signs, trail features, and user-created facilities are not included in this measure. Individually authorized recreation features have minimal impact, but collectively they can impact the sense of primitive recreation.

Because the features included in this measure can be measured objectively, and changes occur only because of management action, accurate detection of small changes is possible. These are relatively large, visible structures; therefore, the impact of adding or removing a single feature can be construed as affecting wilderness character.

Local units are required to select either this measure or the preceding measure, Index of NFS Developed Trails, or may select both measures if relevant to the individual wilderness. Any change in the number of recreation features will result in a change in trend for this measure. An increase in the number of features corresponds with a degrading trend.

Refer to part 2, section 5.4.2, for more detailed guidance on data sources and compilation protocols, analysis, data adequacy, and interpreting the threshold for meaningful change.

5.5 Indicator: Management Restrictions on Visitor Behavior

Section 2(c) of the Wilderness Act stipulates that wilderness should be managed to protect opportunities for primitive and unconfined recreation. Management restrictions in wilderness are often adopted to protect resources or opportunities for solitude in wilderness. However, unconfined recreation refers to types of recreation in which visitors experience a high degree of freedom over their own actions and decisions (Dustin and McAvoy 2000; Dawson and Hendee 2009). Management restrictions are likely to degrade the opportunities for unconfined recreation.

This indicator addresses Forest Service restrictions on visitor behavior in wilderness, encompassing formally adopted regulations or policies that govern visitor behavior, travel, or equipment. Restrictions may be national, regional, or local in scope, and may apply to the entire wilderness or just certain areas within a wilderness.

5.5.1 Measure: Index of Visitor Management Restrictions

This measure is an index that assesses the relative degree of imposition or inconvenience of certain visitor management restrictions as well as the geographic extent of those restrictions. Management restrictions are put in place through the implementation of wilderness regulations, authorized by regional or forest special orders. The degree of imposition is based on research with wilderness visitors. For instance, research has shown that visitors typically strongly oppose restrictions on day use (Hall et al. 2010; Hall and Irizarry 2013), but are more accepting of restrictions on campfires where fuel is scarce (e.g., Borrie and McCool 2007; Hall et al. 2010). Other regulations may be in place, but were not included in this measure because they do not present significant confinement of the visitor (e.g., anti-littering regulations or requiring food to be hung in bear country) or are uncommon.

The temporal aspect of restrictions is included only for restrictions that occur at the same time each year.

There is some debate about whether regulations imposed outside wilderness differ in the way they affect the wilderness experience from regulations that govern behavior once a person enters a wilderness. This measure does not assess whether regulations affect a person before the trip (e.g., use limits) or after they are inside a wilderness (e.g., campfire prohibitions).

Additionally, although the selection of specific regulations and the determination of the impact rating are informed by survey research with wilderness visitors, they are somewhat subjective. Nevertheless, the index as a whole should do a reasonably good job of assessing the unconfined aspect of the Solitude or Primitive and Unconfined Recreation Quality. Because the regulations included in this measure can be objectively measured, and changes occur only because of management action, detection of small trends is possible.

This measure is required for all Forest Service wildernesses. Any change in the measure value will result in a change in trend for this measure. An increase in the measure value corresponds with a degrading trend.

Refer to part 2, section 5.5.1, for more detailed guidance on data sources and compilation protocols, analysis, data adequacy, and interpreting the threshold for meaningful change.